Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> M35h >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Motor Systems >> Traction Motor System >> DTC/Circuit Diagnosis >> DTC P0A1B: Drive Motor A Control Module >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. CHECK DTC DETECTION
    1. Perform "INSPECTION MODE 5". Refer to "DESCRIPTION ".
    2. Start the engine and wait for 10 seconds or more.
    3. Check DTC.

      Is "P0A1B" detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals