Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> M35h >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid Control System >> DTC/Circuit Diagnosis >> DTC P3150: Engine Start System >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    TESTING CONDITION: 

    Before performing the following procedure, confirm that fuel level is enough. 

    : GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE

    Set the vehicle to READY with engine cool condition.

    Does the engine start? 

    YES: INSPECTION END

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals