Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> M35h >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid Control System >> DTC/Circuit Diagnosis >> DTC P2122, P2123: App Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    TESTING CONDITION: 

    Before performing the following procedure, confirm that battery voltage is 8 V or more at idle. 

    : GO TO 2.

  2. DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON and wait at least 1 seconds.
    2. Check DTC.

      Is DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals