Component Inspection

WARNING: This page is about a different variant/trim than selected.

CHECK IN-VEHICLE SENSOR

Turn ignition switch OFF.
Disconnect in-vehicle sensor connector. Refer to "Exploded View ".
Check resistance between in-vehicle sensor terminals.

Terminal		Condition	Resistance kΩ
Terminal		Temperature °C (°F)	Resistance kΩ
1	2	-15 (5)	12.73
		-10 (14)	9.92
		-5 (23)	7.80
		0 (32)	6.19
		5 (41)	4.95
		10 (50)	3.99
		15 (59)	3.24
		20 (68)	2.65
		25 (77)	2.19
		30 (86)	1.81
		35 (95)	1.51
		40 (104)	1.27
		45 (113)	1.07

Is the inspection result normal?

YES: INSPECTION END

NO: Replace in-vehicle sensor.