Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> G37 IPL, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Brake Control System) >> Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: To prevent damage to the parts, never drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact. Never use a pneumatic tool.
  1. Remove instrument lower cover LH and instrument lower cover RH. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect yaw rate/side/decel G sensor harness connector.
  3. Remove yaw rate/side/decel G sensor.
scientia non olet · About Mike's Workshop Manuals