Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Engine Control System - DTCS P0443 To P1084) >> DTC P0850: PNP Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2012 Infiniti G25. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM COMPONENT FUNCTION CHECK

    Without CONSULT 

    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector terminals under the following conditions.
      ECM Condition Voltage (V)
      Connector + -
      Terminal Terminal
      M107 109 128 Selector lever P or N Battery voltage
      Except above Approx. 0

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals