Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Control System - DTCS P1148 To P2A03) >> DTC P1211: TCS Control Unit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2012 Infiniti G25. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING

    TESTING CONDITION: 

    Before performing the following procedure, confirm that battery voltage is more than 10.5 V at idle. 

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start engine and let it idle for at least 60 seconds.
    2. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: "DIAGNOSIS PROCEDURE "

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals