Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (EV Control System) >> DTC/Circuit Diagnosis >> DTC U1010: Control Module (Can) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM CONFIRMATION PROCEDURE AGAIN
    1. Turn power switch ON.
    2. Erase self-diagnostic result.
    3. Perform DTC confirmation procedure. Refer to "DTC LOGIC ".
    4. Check self-diagnostic result.

    Is the DTC detected again? 

    YES: Replace VCM. Refer to "EXPLODED VIEW ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals