Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Traction Motor System) >> DTC/Circuit Diagnosis >> DTC P0A1B: Drive Motor A Control Module >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always power switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. CHECK DTC DETECTION

With CONSULT

  1. Power switch ON and wait for 10 seconds or more.
  2. Check DTC.

Is "P0A1B" detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals