Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Security Control System) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VEHICLE READY SET FUNCTION
    1. Check that DTC except DTC P1610 is not detected.

      If detected, erase the DTC after fixing.

    2. Turn power switch OFF.
    3. Contact the registered Intelligent Key backside to power switch and wait 5 seconds.
    4. Turn power switch ON.
    5. Turn power switch OFF and wait 5 seconds.
    6. Repeat steps  3 and  5 twice (a total of 3 times).
    7. Check that vehicle can be set to READY.

      INSPECTION END

scientia non olet · About Mike's Workshop Manuals