Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

CHECK REAR POWER WINDOW SWITCH INPUT SIGNAL

Turn power switch OFF.
Disconnect rear power window switch connector.
Turn power switch ON.

Check voltage between rear power window switch harness connector and ground.

VOLTAGE REFERENCE CHART

(+)			(-)	Condition		Voltage (V) (Approx.)
Rear power window switch
Connector		Terminal
LH	D63	2	Ground	Power window main switch (rear LH)	NEUTRAL	0 - 1
		2			UP	9 - 16
		3			NEUTRAL	0 - 1
		3			DOWN	9 - 16
RH	D43	2		Power window main switch (rear RH)	NEUTRAL	0 - 1
		2			UP	9 - 16
		3			NEUTRAL	0 - 1
		3			DOWN	9 - 16

Is the inspection result normal?

YES: GO TO 3.

NO: GO TO 2.

CHECK REAR POWER WINDOW SWITCH CIRCUIT

Turn power switch OFF.
Disconnect power window main switch connector.

Check continuity between power window main switch harness connector and rear power window switch harness connector.

CONTINUITY REFERENCE CHART

Power window main switch		Rear power window switch			Continuity
Connector	Terminal	Connector		Terminal	Continuity
D35	9	LH	D63	2	Existed
	8	LH	D63	3
	7	RH	D43	2
	6	RH	D43	3

Check continuity between power window main switch harness connector and ground.

CONTINUITY REFERENCE CHART

Power window main switch		Ground	Continuity
Connector	Terminal
D35	9		Not existed
	8
	7
	6

Is the inspection result normal?

YES: Replace power window main switch. Refer to "REMOVAL AND INSTALLATION ".

NO: Repair or replace harness.

CHECK REAR POWER WINDOW SWITCH
Check rear power window switch.

Refer to "COMPONENT INSPECTION ".

Is the inspection result normal?

YES: GO TO 4.

NO: Replace rear power window switch. Refer to "REMOVAL AND INSTALLATION ".
CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".

INSPECTION END