Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> FX50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Body Control System (CROSSCABRIOLET)) >> Removal And Installation >> Combination Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove steering column cover. Refer to , "EXPLODED VIEW ".
  2. Remove screws.
  3. Disconnect the connector.
  4. Pull up the combination switch to remove it.
scientia non olet · About Mike's Workshop Manuals