Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> FX50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine Control System - Introduction) >> System Description >> Diagnosis System (ECM) >> On Board Diagnosis Function >> SRT Status Mode >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2012 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown below.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
      Fig 1: SRT Status Blinking Pattern (All SRT Codes Are Set/Not Set)
      G07012202Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals