Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Body Control System) >> Removal And Installation >> Combination Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove steering column cover. Refer to "EXPLODED VIEW ".
  2. Remove screws.
  3. Disconnect the connector.
  4. Pull up the combination switch to remove it.
scientia non olet · About Mike's Workshop Manuals