Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Security Control System) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE START FUNCTION
    1. Perform the check for DTC except DTC P1610.
    2. Use CONSULT-III to erase DTC after fixing.
    3. Turn ignition switch OFF.
    4. Turn ignition switch ON when registered Intelligent Key insert into key slot and wait for 5 seconds.
    5. Return the ignition switch OFF and wait 5 seconds.
    6. Repeat steps 4 and 5 twice (total of 3 cycles).
    7. Check that engine can start when registered Intelligent Key insert into key slot.

      INSPECTION END

scientia non olet · About Mike's Workshop Manuals