Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THROTTLE CONTROL MOTOR

Turn ignition switch OFF.
Disconnect electric throttle control actuator harness connector.
Check resistance between electric throttle control actuator terminals as follows.

RESISTANCE SPECIFICATION

Electric throttle control actuator		Resistance
Bank	Terminals	Resistance
1	1 and 2	Approx. 1 - 15 Ω [at 25°C (77°F)]
2	5 and 6	Approx. 1 - 15 Ω [at 25°C (77°F)]

Is the inspection result normal?

YES: INSPECTION END

NO: GO TO 2.

REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
1. Replace malfunctioning electric throttle control actuator.
2. Go to "SPECIAL REPAIR REQUIREMENT ".
INSPECTION END