Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Power Control System -- FX35/FX50) >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B261A: Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Infiniti FX50 and 2011 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE
  1. Press the push-button ignition switch under the following conditions, and wait for at least 1 second.
    • Selector lever is in the P or N position.
    • Do not depress brake pedal.
  2. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals