Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Driver Assistance System (BSW)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> BSW Control Module >> BSW CONTROL MODULE : Diagnosis Procedure

BSW CONTROL MODULE : Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn the BSW system ON.
    2. Perform "All DTC Reading" with CONSULT-III.
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "BSW".

    Is "U1010" detected as the current malfunction? 

    YES: Replace the BSW control module. Refer to "REMOVAL AND INSTALLATION ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals