DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SELF-DIAG RESULT
With CONSULT-III
- Turn ignition switch ON.
- Perform "AIR BAG" Self Diagnostic Result with CONSULT-III.
Without CONSULT-III
- Turn ignition switch ON.
- Check the air bag warning lamp status. Refer to "DIAGNOSIS WITH AIR BAG WARNING LAMP ".
NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.Is malfunctioning part detected?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END