Component Inspection (Manual Mode Switch)
- CHECK MANUAL MODE SWITCH
Check continuity between A/T shift selector connector terminals.
A/T shift selector connector Condition Continuity Terminal 1 4 Selector lever is shifted to manual shift gate side Existed Other than the above Not existed 2 Selector lever is shifted to - side Existed Other than the above Not existed 3 Selector lever is shifted to + side Existed Other than the above Not existed 5 Selector lever is shifted to manual shift gate side Not existed Other than the above Existed Is the inspection result normal?
YES: INSPECTION END
NO: Repair or replace damaged parts. Refer to "REMOVAL AND INSTALLATION ".