Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Warning Chime System) >> Component Diagnosis >> Meter Buzzer Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OPERATION OF METER BUZZER 
    1. Select "BUZZER" of "BCM" on CONSULT-III.
    2. Perform "LIGHT WARN ALM" of "ACTIVE TEST".

    Does meter buzzer beep? 

    YES: INSPECTION END

    NO: GO TO  2.

  2. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL 

    Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.

    BUZZER

    Under the condition of buzzer input : On

    Except above : Off

    Is the inspection result normal? 

    YES: Replace combination meter.

    NO: Replace BCM. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About Mike's Workshop Manuals