Diagnosis Procedure
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SYSTEM SETTING
- Check system setting.
Refer to "SYSTEM SETTING : SPECIAL REPAIR REQUIREMENT ".
- Check the operation.
Is the inspection result normal?
YES: Entry/Exit function is OK.
NO: GO TO 2.
- Check system setting.
- PERFORM SYSTEM INITIALIZATION
- Perform system initialization.
Refer to "SYSTEM INITIALIZATION : SPECIAL REPAIR REQUIREMENT ".
- Check the operation.
Is the inspection result normal?
YES: Entry/Exit function is OK.
NO: GO TO 3.
- Perform system initialization.
- CHECK FRONT DOOR SWITCH (DRIVER SIDE)
Check front door switch (driver side).
Refer to "COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 4.
NO: Repair or replace the malfunction parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: GO TO 1.