Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Brake Control System) >> Component Diagnosis >> DTC C1144: Steering Angle Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC REPRODUCTION PROCEDURE 
    1. Turn the ignition switch ON.
    2. Select "ST ANG SEN ADJUSTMENT" in "WORK SUPPORT", and perform adjust the neutral position of steering angle sensor.
    3. Perform ABS actuator and electric unit (control unit) self-diagnosis.

    Is DTC "C1144" detected? 

    YES: Proceed to DIAGNOSIS PROCEDURE  .

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals