Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Heater & Air Conditioning Control System) >> Basic Inspection >> Inspection And Adjustment >> With Left And Right Ventilation Temperature Separately Control System >> Inlet Port Memory Function >> Description

Inlet Port Memory Function: Description

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

When ignition switch is turned from OFF to ON, inlet port can be set to AUTO or manual.

Operating procedures for this trimmer are as per the following:

  1. Begin self-diagnosis STEP-5 mode. Refer to DIAGNOSIS DESCRIPTION  .
  2. Press fan (UP:+) switch to set system in auxiliary mode.
  3. Press intake switch as desired.
    REC INDICATOR REFERENCE TABLE

    FRE indicator REC indicator Setting status Setting changeover method
    FRE REC
    OFF ON AUTO control (Initial setting) Manual REC status is memorized. (Initial setting) Intake switch: ON
    ON ON Manual FRE status is memorized. Manual REC status is memorized.
    ON OFF Manual FRE status is memorized. AUTO control
    OFF OFF AUTO control AUTO control

    When battery cable is disconnected or battery voltage is below 10 V, memory function is canceled. Memory function set becomes that of initial condition.

scientia non olet · About Mike's Workshop Manuals