Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK ENGINE START FUNCTION
    1. Perform the check for DTC except DTC P1610.
    2. Use CONSULT to erase DTC after fixing.
    3. Turn ignition switch OFF.
    4. Turn ignition switch ON when registered Intelligent Key insert into key slot and wait for 5 seconds.
    5. Return the ignition switch OFF and wait 5 seconds.
    6. Repeat steps  4 and  5 twice (total of 3 cycles).
    7. Check that engine can start when registered Intelligent Key insert into key slot.

      : INSPECTION END

scientia non olet · About Mike's Workshop Manuals