Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Brake Control System (With VDC)) >> DTC/Circuit Diagnosis >> DTC C1170: Variant Coding >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. CHECK DTC DETECTION

    With CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ABS".

    Is DTC "C1170" detected? 

    YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals