Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Engine Control System - Introduction) >> System Description >> Diagnosis System (ECM) >> On Board Diagnosis Function >> SRT Status Mode >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2011 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown blow.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
      Fig 1: SRT Status Mode Indication Pattern
      G05880995Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals