Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (Power Window Control System) >> DTC/Circuit Diagnosis >> Door Key Cylinder Switch >> Component Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DOOR KEY CYLINDER SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect front door lock assembly (driver side) (key cylinder switch) connector.
    3. Check front door lock assembly (driver side) (key cylinder switch).
      Front door lock assembly (driver side) (key cylinder switch) Key position Continuity
      Terminal
      5 4 Unlock Existed
      Neutral/Lock Not existed
      6 Lock Existed
      Neutral/Unlock Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace front door lock assembly (driver side) (key cylinder switch). Refer to "OUTSIDE HANDLE: REMOVAL AND INSTALLATION ".