Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Security Control System) >> Symptom Diagnosis >> Panic Alarm Function Does Not Operate >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK REMOTE KEYLESS ENTRY FUNCTION

    Check remote keyless entry function.

    Does door lock/unlock with Intelligent key button? 

    YES: GO TO 2.

    NO: GO TO "DIAGNOSIS PROCEDURE ".

  2. CHECK VEHICLE SECURITY ALARM OPERATION

    Check vehicle security alarm operation.

    Does alarm (headlamps and horns) active? 

    YES: GO TO 3.

    NO: GO TO "VEHICLE SECURITY SYSTEM: SYSTEM DESCRIPTION ".

  3. CHECK "PANIC ALARM SET" SETTING IN "WORK SUPPORT"

    Check "PANIC ALARM SET" setting in "WORK SUPPORT".

    Refer to "INTELLIGENT KEY: CONSULT FUNCTION (BCM - INTELLIGENT KEY) ".

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Set "PANIC ALARM SET" setting in "WORK SUPPORT".

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the result normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: GO TO  1.

scientia non olet · About Mike's Workshop Manuals