Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Heater & Air Conditioning Control System) >> System Description >> Diagnosis System (HVAC) >> CONSULT-III Function >> Work Support

Work Support

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
WORK ITEM DESCRIPTION

Work item Description Refer to
TEMP SET CORRECT Setting change of temperature setting trimmer (front) can be performed. "FRONT AUTOMATIC AIR CONDITIONING SYSTEM : TEMPERATURE SETTING TRIMMER (FRONT) "
BLOWER SET Setting change of foot position setting trimmer can be performed. "FRONT AUTOMATIC AIR CONDITIONING SYSTEM : FOOT POSITION SETTING TRIMMER "
REC MEMORY SET Setting change of inlet port memory function (REC) can be performed. "FRONT AUTOMATIC AIR CONDITIONING SYSTEM : INLET PORT MEMORY FUNCTION (REC) "
FRE MEMORY SET Setting change of inlet port memory function (FRE) can be performed. "FRONT AUTOMATIC AIR CONDITIONING SYSTEM : INLET PORT MEMORY FUNCTION (FRE) "
GAS SENSOR ADJUSTMENT(1) Setting change of exhaust gas / outside odor detecting sensor sensitivity adjustment function can be performed. "ACCS (ADVANCED CLIMATE CONTROL SYSTEM) : EXHAUST GAS / OUTSIDE ODOR DETECTING SENSOR SENSITIVITY ADJUSTMENT FUNCTION "
CLEAN SW SET(1) Setting change of auto intake switch interlocking movement change function can be performed. "ACCS (ADVANCED CLIMATE CONTROL SYSTEM) : AUTO INTAKE SWITCH INTERLOCKING MOVEMENT CHANGE FUNCTION "
REAR TEMP SET CORRECT Setting change of temperature setting trimmer (rear) can be performed. "FRONT AUTOMATIC AIR CONDITIONING SYSTEM : TEMPERATURE SETTING TRIMMER (FRONT) "
(1) With ACCS (advanced climate control system)
NOTE: When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.