Data Monitor
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
Display item list
DISPLAY ITEM LIST
| Monitor item [Unit] | Description | |
|---|---|---|
| AMB TEMP SEN | [°C (°F)] | Ambient sensor value converted from ambient sensor signal received from ambient sensor |
| IN-VEH TEMP | [°C (°F)] | Front in-vehicle sensor value converted from front in-vehicle sensor signal received from front in-vehicle sensor |
| INT TEMP SEN | [°C (°F)] | Intake sensor value converted from intake sensor signal received from intake sensor |
| SUNLOAD SEN | [w/m2 ] | Sunload sensor value converted from sunload sensor signal (driver side) received from sunload sensor |
| AMB SEN CAL | [°C (°F)] | Ambient temperature value calculated by A/C auto amp. |
| IN-VEH CAL | [°C (°F)] | In-vehicle temperature (front side) value calculated by A/C auto amp. |
| INT TEMP CAL | [°C (°F)] | Front evaporator fin temperature value calculated by A/C auto amp. |
| SUNL SEN CAL | [w/m2 ] | Sunload value (driver side) calculated by A/C auto amp. |
| COMP REQ SIG | [On/Off] | Displays A/C switch ON/OFF status transmitted to other units via CAN communication |
| FAN REQ SIG | [On/Off] | Displays front blower motor ON/OFF status transmitted to other units via CAN communication |
| FAN DUTY | Duty ratio of front blower motor judged by A/C auto amp. | |
| XM | Target discharge front air temperature (driver side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor | |
| PASS SUNL CAL | [w/m2 ] | Sunload value (passenger side) calculated by A/C auto amp. |
| PASS SUNLOAD SEN | [w/m2 ] | Sunload sensor value converted from sunload sensor signal (passenger side) received from sunload sensor |
| PA TARGET A/TEMP | Target discharge front air temperature (passenger side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor | |
| RRIN TEMP SEN | [°C (°F)] | Rear in-vehicle sensor value converted from rear in-vehicle sensor signal received from rear in-vehicle sensor. |
| RRIN TEMP CAL | [°C (°F)] | In-vehicle temperature (rear side) value calculated by A/C auto amp. |
| RR INT TMP CL | [°C (°F)] | Rear evaporator fin temperature value calculated by A/C auto amp. |
| RRFAN REQ SIG | [On/Off] | Displays rear blower motor ON/OFF status transmitted to other units via CAN communication |
| RR FAN DUTY | Duty ratio of rear blower motor judged by A/C auto amp. | |
| RR XM | Target discharge rear air temperature (driver side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor | |
| ENG COOL TEMP | [°C (°F)] | Engine coolant temperature signal value received from ECM via CAN communication |
| VEHICLE SPEED | [km/h (mph)] | Vehicle speed signal value received from combination meter via CAN communication |