Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Exterior Lighting System) >> System Description >> Diagnosis System (AFS) >> CONSULT-III Function (ADAPTIVE LIGHT) >> Data Monitor

Data Monitor

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
MONITOR ITEM DESCRIPTION

Monitor item [Unit] Description
STR ANGLS SIG [deg] The steering angle value judged by the steering angle sensor signal received from the steering angle sensor via CAN communication
VHCL SPD [km/h] The vehicle speed signal value from the combination meter via CAN communication
SLCT LVR POSI [P/R/N/D/M/FF] The selector lever status judged by the position indicator signal received from TCM via CAN communication
HEAD LAMP [On/Off] The headlamp On/Off status judged by the low beam headlamp (ON) signal received from IPDM E/R via CAN communication
AFS SW [On/Off] The AFS On/Off status judged by AFS control unit
HI SEN OTP RR [V] The rear height sensor signal voltage value input from the rear height sensor
HI SEN OTP FR [V] The front height sensor signal voltage value input from the front height sensor
LEV ACTR VLTG [%] The ratio value to the battery voltage generated by the levelizer activation signal control value judged by AFS control unit
SWVL SEN RH(1) [deg] The head lamp swivel angle value judged by AFS control unit received from the swivel position sensor signal input from the swivel actuator
SWVL SEN LH(1) [deg]
SWVL ANGLE RH(1) [deg] The swivel angle command value to the swivel motor judged by AFS control unit
SWVL ANGLE LH (1) [deg]
(1) The swivel angle "0°" (feedback value) of the swivel position sensor signal may differ from the swivel angle "0°" of the swivel motor (AFS control unit command value). This causes that the swivel motor initializes the value based on the step number from the stopper.