Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Engine Control System - DTCS P1225 Through P2A03) >> DTC P1564: ASCD Steering Switch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC P1564 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to "DTC LOGIC ".
DTC DETECTION LOGIC

DTC No. Trouble diagnosis name (Trouble diagnosis content) DTC detecting condition Possible cause
P1564 ASCD SW (ASCD steering switch)
  • An excessively high voltage signal from the ASCD steering switch is sent to ECM.
  • ECM detects that input signal from the ASCD steering switch is out of the specified range.
  • ECM detects that the ASCD steering switch is stuck ON.
  • Harness or connectors (The switch circuit is open or shorted.)
  • ASCD steering switch
  • ECM
scientia non olet · About Mike's Workshop Manuals