Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Engine Control System - Introduction, System Description And Basic Inspection (VK56VD)) >> Basic Inspection >> Throttle Valve Closed Position Learning >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2011 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
  1. START
    1. Check that accelerator pedal is fully released.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

      Check that throttle valve moves during the above 10 seconds by confirming the operating sound.

      END

scientia non olet · About Mike's Workshop Manuals