Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Engine Control System - Introduction, System Description And Basic Inspection (VK56VD)) >> Basic Inspection >> Fuel Pressure >> Work Procedure >> Fuel Pressure Release >> Without Consult-III

Without Consult-III

WARNING: This page is about a different car, the 2011 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel pump fuse in IPDM E/R.
    NOTE:
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.