Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System -- M37/M56 >> DTC/Circuit Diagnosis >> DTC B260C: Steering Lock Unit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Shift selector lever to the P position.
    2. Press push-button ignition switch under the following condition.
      • Brake pedal: Not depressed
    3. Turn ignition switch ON.
    4. Turn ignition switch OFF.
    5. Press driver side door switch.
    6. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals