Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Power Control System -- G25/G37 Sedan) >> Power Distribution System >> Removal And Installation >> Push Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the cluster lid A assembly. Refer to "A/T MODELS : REMOVAL AND INSTALLATION ".
  2. Remove the push-button ignition switch (1) from cluster lid A assembly, and then remove pawl (A). Press push-button ignition switch (1) back to disengage from cluster lid A assembly.
    Fig 1: Identifying Push Button Ignition Switch And Cluster Lid
    G04888450Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals