Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Control System - Component Testing - G25 Sedan) >> Fuel Injector >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti G25. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as follows.
      TERMINALS RESISTANCE REFERENCE CHART

      Terminals Resistance
      1 and 2 11.1 - 14.5 Ω [at 10 - 60°C (60 - 140°F)]
      Fig 1: Checking Resistance Between Fuel Injector Terminals
      G04875480Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector. Refer to "REMOVAL AND INSTALLATION ".