Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Engine Control System - Introduction (2 Of 2)) >> Fuel Injector >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as follows.
      TERMINAL RESISTANCE REFERENCE CHART

      Terminals Resistance (Ω)
      1 and 2 11.1 - 14.3 [at 10 - 60°C (60 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector.

scientia non olet · About Mike's Workshop Manuals