Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Engine Control System - DTC U0164 Through P0181) >> DTC U1003: Can Comm Circuit >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC U1003 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607.
Refer to "DTC LOGIC ".
DTC DETECTION CONDITION CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
U1003 Lost communication with VVEL control module CAN communication signal other than OBD (emission related diagnosis) is not received between VVEL control module and ECM for 2 seconds or more.
  • Harness or connectors (VVEL CAN communication line is open or shorted)
  • ECM
  • VVEL control module