Diagnosis Procedure

1. CHECK DOOR LOCK FUNCTION

   Lock/unlock door with door request switch.

   Refer to "DOOR LOCK FUNCTION : SYSTEM DESCRIPTION ".

   Is the operation normal? 

   YES: GO TO 2.

   NO: Check door lock function. Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".

2. PERFORM WORK SUPPORT

   Perform "INSIDE ANT DIAGNOSIS" on "Work Support" of "INTELLIGENT KEY".

   Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) (WITHOUT AUTOMATIC BACK DOOR) ", or "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) (WITH AUTOMATIC BACK DOOR) ".

   GO TO 3.

3. PERFORM SELF DIAGNOSTIC RESULT

   Perform Self Diagnostic result of "INTELLIGENT KEY".

   Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) (WITHOUT AUTOMATIC BACK DOOR) ", or "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) (WITH AUTOMATIC BACK DOOR) ".

   Is DTC detected? 

   YES: Refer to "DTC LOGIC " (instrument center), refer to "DTC LOGIC " (console), refer to "DTC LOGIC " (luggage room).

   NO: GO TO 4.

4. CHECK PUSH-BUTTON IGNITION SWITCH

   Check push-button ignition switch.

   Refer to "COMPONENT FUNCTION CHECK ".

   Is the inspection normal? 

   YES: GO TO 5.

   NO: Repair or replace malfunctioning parts.

5. CONFIRM THE OPERATION

Confirm the operation again.

Is the inspection normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: GO TO  1.