Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> FX35 AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System -- FX35/FX50 >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B261A: Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE
  1. Press the push-button ignition switch under the following conditions, and wait for at least 1 second.
    • Selector lever is in the P or N position.
    • Do not depress brake pedal.
  2. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals