Component Inspection (Shift Lock Solenoid)
Apply voltage to terminals 3 and 4 of shift lock unit connector, and then check that shift lock solenoid is activated.
CAUTION:
Connect the fuse between the terminals when applying the voltage.
SHIFT LOCK UNIT CONNECTOR CONDITION
| Shift lock unit connector | Condition | Status | |
|---|---|---|---|
| Terminal | |||
| + (fuse) | - | ||
| 3 | 4 | Apply 12 V direct current between terminals 3 and 4. | Shift lock solenoid operates |
Can the lock plate be moved up and down?
YES: INSPECTION END
NO: Replace shift lock unit. Refer to "REMOVAL AND INSTALLATION ".