DTC Confirmation Procedure

CAUTION:

" "DIAGNOSIS PROCEDURE "" must be performed before starting "DTC CONFIRMATION PROCEDURE".
Never perform "DTC CONFIRMATION PROCEDURE" before completing the repair, which may cause secondary malfunction.
Always drive vehicle at a safe speed.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.
CHECK DTC DETECTION

With CONSULT

Start the engine.
Select "SLCT LVR POSI" and "GEAR" in "Data Monitor" in "TRANSMISSION".
Drive vehicle the following condition.
SLCT LVR POSI : D

GEAR : 1st through 7th
Perform "Self Diagnostic Results" in "TRANSMISSION".

With GST

Follow the procedure "With CONSULT".

Is "P1730" detected?

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END