Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Exterior Lighting System (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT

    CONSULT DATA MONITOR

    1. Turn ignition switch ON.
    2. Select "HAZARD SW" of BCM (FLASHER) data monitor item.
    3. With operating the hazard switch, check the monitor status.
      HAZARD SWITCH MONITOR STATUS REFERENCE

      Monitor item Condition Monitor status
      HAZARD SW Hazard switch ON On
      OFF Off

      Is the item status normal? 

      YES: Hazard switch circuit is normal.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals