Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" in "Work Support" mode of "INTELLIGENT KEY" of "BCM" using CONSULT.
Refer to "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) ".
GO TO 2.
- PERFORM SELF-DIAGNOSTIC RESULT
Select "Self Diagnostic Result" mode of "BCM", and verify whether or not DTC of inside key antenna is detected.
Is DTC detected?
YES: Refer to , "DTC LOGIC " (console) or , "DTC LOGIC " (trunk room).
NO: GO TO 3.
- CHECK PUSH-BUTTON IGNITION SWITCH
Verify push-button ignition switch.
Refer to , "COMPONENT FUNCTION CHECK ".
Is the operation normal?
YES: GO TO 4.
NO: Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES: Verify intermittent incident. Refer to , "INTERMITTENT INCIDENT ".
NO: GO TO 1.