Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Security Control System (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> DTC B210B: Starter Control Relay >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START
    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.
    3. Touch "ERASE".
    4. Perform DTC CONFIRMATION PROCEDURE for DTC B210B. Refer to "DTC LOGIC ".

      Is the DTC B210B displayed again? 

      YES: Replace IPDM E/R. Refer , "REMOVAL AND INSTALLATION ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals