Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Brake Control System-VDC (CROSSCABRIOLET)) >> Removal And Installation >> Steering Angle Sensor >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

CAUTION:
  • Never reuse steering angle sensor.
  • After removing/replacing a steering angle sensor, be sure to perform the adjustment of steering angle sensor neutral position. Refer to "DESCRIPTION ".
scientia non olet · About Mike's Workshop Manuals