Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Drive Positioner (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> Tilt Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "TILT SW-UP", "TILT SW-DOWN" in "Data monitor" mode with CONSULT.
    2. Check tilt switch signal under the following conditions.
      TILT SWITCH MONITOR ITEM CONDITION REFERENCE

      Monitor item Condition Status
      TILT SW-UP Tilt switch Operate (up) ON
      Other than the above OFF
      TILT SW-DOWN Operate (down) ON
      Other than the above OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals