Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Drive Positioner (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> Lifting Switch (Front) >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "Data monitor" mode with CONSULT.
    2. Check lifting switch (front) signal under the following conditions.
      LIFTING SWITCH MONITOR ITEM CONDITION REFERENCE

      Monitor item Condition Status
      LIFT FR SW-UP Lifting switch (front) Operate (up) ON
      Other than the above OFF
      LIFT FR SW-DN Operate (down) ON
      Other than the above OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals